Ironwork test results =/

Well...I did my little test of render times for the two different ways of creating the ironwork. I must say, I'm disappointed with the results. To recap: I can create ironwork either by applying an image with transparent areas to a flat plane or by creating the actual geometry of the ironwork in 3D. Both ways are labor-intensive for me; I was just wondering which way would render faster. If this test is any indication, the first route is a lot faster. I did two renders of the same spot with the two different techniques. The UV-mapped image technique clocked in at 7:59...



...and the real 3D geometry technique clocked in at a whopping 22:23. =/



This is a disappointment because creating the actual geometry is a rather more elegant solution. For one thing, it lets me actually see the ironwork while I'm navigating through the model; it doesn't just magically appear at render time. Furthermore, it just plain looks better. And perhaps most importantly of all, real geometry allows my ambient occlusion lighting to bounce through the holes and allow us to see the shadowy areas of the balconies. If I create a flat plane with a transparent image texture, ambient occlusion treats it as an opaque wall, and the balcony turns black. Then I have to carefully light the balconies separately, which in turn increases the render time...something I did not do for this test.

I'm using that last factor as a huge excuse because...well, I don't want to UV-map these puppies anymore. I want real geometry. I did the UV-mapping for the HM ironwork, and the results were merely satisfactory after a buttload of tedious work. Render times were still high, and I didn't reap any of the benefits of doing true detailed meshes. So I'm gonna be adventurous and make all the POTC ironwork the more authentic way...and render times can walk the plank, for all I care! =D

By the way...sorry for the weird way the lamp is cut off in the first image. I forgot to activate ray transparency, which also would have boosted render times a little, I think. Another excuse to do real geometry! ;)

Lastly, to my less CGI-oriented readers, I apologize for these more technical posts. I'm sure some of you just want the Disneyland stuff, not the nitty-gritty details of how I do it, but I'll continue trying to deliver both in proper proportions. =)

The tribe has spoken!

Despite bitterly polarized opinions on the matter (wink wink), I've made my decision about what will be occupying the space above the entrance to Pirates. =D I consider the new creation in this small render somewhat of a down payment:



Thank you very much to everyone who contributed their surprisingly unanimous input! You made me feel a lot more confident as I made my decision, and I'm glad y'all apparently want the same choice I was leaning toward.

Actually, while we're on the topic of signs, I may as well explain how I go about making them. For some simple signs (an EXIT sign in the Indy queue comes to mind), all I really do is find a good photo of it and then slap that bit of the photo onto an object of the right size and shape. But for stuff like the entrance signs for the Dream Suite and Pirates, I prefer a somewhat more robust solution. The thing about photos is...they're accurate, but their resolution is limited. And in order for the image to appear sharp when it's rendered by Blender, it needs to have fairly high resolution. (Besides, you can get yucky stuff like noise and perspective distortion and objects in the way when you're dealing with photos.)

So my labor-intensive but oh-so-definitely-worth-it solution is to replicate the sign in Photoshop using appropriate fonts, vector techniques, and layer styles. I'm basically tracing over one or more perspective-corrected reference photos using the pen tool at first...then it's a matter of getting the colors and materials to look right. It takes a while - particularly tracing - but the result is a very sharp, clean image that can then be UV-mapped to the sign object in Blender. (Just doing a non-UV texture works too, since the sign object is typically flat and only one side of it shows, but that doesn't allow me to see the image previewed on the object as I navigate through the scene.)

As a couple of extra goodies to illustrate what I mean, here are my texture images for Pirates and the Dream Suite. In the case of these two signs, I've built the borders as separate, truly 3D objects that just take flat color materials; the UV-mapped sign object sits nestled within the frame, so you don't see that frame in the image. And notice how the corners don't show up on the final sign objects, since they have rounded shapes, so it doesn't matter what goes in the corners of the image. Also note how I have to simulate elements that would be truly three-dimensional in real life, such as raised lettering. I've also added a reflection to the Dream Suite image so that I don't have to increase render times by doing a truly reflective material. Finally, I want to point out that although the Dream Suite sign is way physically smaller than the Pirates sign, I've made the Dream Suite image significantly bigger so that the small Disneyland lettering is still sharp. If I wanted to get really fancy, I could put that in a smaller, higher-res image and let the rest of the image have a lower resolution, but I guess I'm just not that fancy.





Also, just so ya know, I've now added the curved steps on either side of the front balcony. No renders of them yet, since I haven't even added the sides or handrails or anything, but they're there, I promise! =D I've also added the two lamps on the balcony, and I hope to build some of the ironwork between the ground and the balcony. I'll also have to run some tests to see which renders more quickly - truly three-dimensional modeled ironwork, or UV-mapped PNG images with transparent areas and invisible lights behind them to simulate ambient light from outside the ironwork. So much to do! =P

To Suite or Not to Suite? PLEASE VOTE!

Hey y'all! The most important part of today's post is this: Please leave me a comment telling me whether I should build the Disney Gallery or build the Dream Suite, and why! More on that later. In the mean time, got two new renders for you.





The bulk of the work on the front facade is finished; the fancy ironwork is a challenge I'm avoiding for the time being, and the lamps aren't yet in place, but the rest is basically finished, at least if we're going off of the structure as it originally existed. The curvy exterior staircases were added when the Disney Gallery was built, and I'm probably going to add them to my model, but I haven't done so yet. You can see that I have added lots of doors and windows, as well as the attraction's main sign.

Anyway, now that the front facade is in a semi-complete state, I've changed gears slightly and I'm focusing mostly on the courtyard behind and above the entrance. This used to be publicly accessible as part of the Disney Gallery, but it's now quite a privilege to view, since it's part of the exclusive Dream Suite that most of us will never see. This is an interesting area to model because I don't have any elevation plans or anything - I just have to work closely from photos to make sure it all matches up with what I know from elevations of the front of the building. I've had to make continual tweaks to get it right, but I think I'm pretty close now. Just have to add lots more details!

Oh, so I had a funny moment the other day. You know, no offense, Disney, but your sites are generally pretty terrible, especially for someone like me who's looking for detailed information on this stuff. I pretty much gave up on finding anything useful there (besides ticketing information and the like) ages ago. So it came as quite a shock to me when I realized that there's a floor plan of the Dream Suite available on this page! =O It's right at the beginning, and just for a moment, but taking a screenshot of it was easy enough. Apparently, this blueprint is truly to scale, which is making it invaluable as I develop this area. (I have noticed a few slight inaccuracies, though, such as the lack of a certain bathtub.)

This brings me to my last and most important point, the one I already touched on: I need your input in deciding whether to model the Disney Gallery or the Dream Suite. The difference may seem trivial to some of you, but there are very concrete differences in the structure, both internally and externally, and I need to pick which one I'm going to do.

DISNEY GALLERY PROS

• fewer walls in some places
  
• I've already built the front door in its Disney Gallery form
  
• nice, elegant arches in one corner of the courtyard
  
• don't have to worry about the elevator!
  
• more sentimental for some fans
  

DREAM SUITE PROS

• I've already built a couple of elements that are specific to the Dream Suite
  
• the roof over the master bathroom looks much cooler, and I've already built it!
  
• would allow virtual tours of a not-very-accessible location in the park
  
• I have that plan of the Dream Suite, but none for the Disney Gallery
  
• online photos of the Dream Suite are a little more abundant
  
• the Dream Suite is current...I haven't departed from current reality in my model so far
  

So yeah, I'm pretty split on the issue. I'll probably just do the Dream Suite, since doing the Disney Gallery would require obliterating the new ventilator and traffic pads and so forth that I worked so hard on...and I have more reference material...and it's more current, which is kind of nice, since the rest of my model is, too, at least so far. Anyway, what do YOU think? Yes, you! The one reading this right now! Take a moment out of your day to let me know, and preferably back it up with some reasons.

Pirates progress and Winchester Mystery House

Sorry it's been a bit of a longer wait for this update - after my initial excitement about the Pirates model, progress has slowed a little, due in part to the increasing difficulty of the areas I'm working on. The front of the attraction's main entrance is relatively straightforward...its complexity makes it time-consuming, but I've got elevation for that part, and the structure is nicely aligned with north, south, east, and west. The adjacent areas are more challenging because I have no elevations; I basically have to work from photos, using aerial shots as a guide to make sure the horizontal distances and angles are correct. I mean, I've got 12 medium- to high-res shots of the entrance open in Photoshop right now just for reference, and I often bring up others as well. There's a lot of careful observation that goes into figuring this stuff out...a lot of careful comparisons between different resources to produce the most accurate big picture possible.

Anyway, enough chatter - here's today's one new render.



As you can see, this one's from a higher vantage point than the others. I wanted to show off some of the roof elements and the way the entrance is eventually going to connect up with the rest of the first show building. The area on the left apparently had its roofing replaced within the last two years, including a new ventilator, which I've added accordingly. Also visible is the control room for Fantasmic!, I believe - it's behind the five-sided structure with the reddish shutters on the right. It's hard to see, but there's now detailed ironwork on some of the front balconies...this was done with real geometry, and it's costing me rendering speed because of the sheer number of polygons. I swear, it's a good thing this model takes so long to create...by the time it's anywhere near finished, it'll be so complex that it'll require the kind of computing speed that won't be attainable for years!

In other news, I had a chance to help out on a Travel Channel shoot at the Winchester Mystery House a week ago. I hadn't been there since I was quite young, so it was absolutely fascinating to see it as an adult with interests in unorthodox twists on old architecture and themed entertainment. Really bizarre place...made me want to develop a 3D model of it! =P Unfortunately, I'm told there are no blueprints, since Sarah Winchester was really flying by the seat of her pants when it came to the design, and attempts at mapping out the whole house to scale have been largely futile. If any of you happen to find evidence to the contrary, I'd appreciate you letting me know! In the mean time, I suppose I'll just have to wait for technologies like Photosynth to get so incredible that they can handle the task of working out a photo-based model of the whole house!

More work on Pirates entrance

Well, I am just plowing forward with Pirates! Here's the texturing work I've been doing. The tile and brick textures are derived from photos I took in the park. There's also more and more detail appearing - as you can see, the walls in front now extend down to ground level. There's still a LOT to do, though. And I must confess, the whole thing is made somewhat more difficult and frustrating by the fact that my blueprint-ish source material is not wholly accurate. I constantly have to make adjustments to get it to more closely resemble the real thing. I think it's pretty dang close so far, though.

Pirates of the Caribbean entrance

That's right, folks, I've been working on the facade of Pirates! Now, Jeff Skinner is already doing a fantastic job of Pirates and NOS in general over at bendintheriver.net - I cannot recommend that site highly enough. For that reason, Pirates always seemed a little redundant to me, and I avoided doing things he'd already done. But I have an inexplicable urge to work on Pirates right now, so I'm taking advantage of it. I've got more resources on the area than ever before, so why not?

Here's the first render. As you can see, I'm working my way from the top down. Why? Not really sure. Just felt right. Unfortunately, the plan I'm working off of seems to be ever so slightly inaccurate, so I'm having to pay very close attention to telephoto shots I recently took from the Mark Twain. Those are providing me with the details that either aren't in the plan at all or just aren't quite right.



This second render shows the model as it exists as I'm posting this. I've added walls to the ends of the roof, new dormer windows, the railing around the widow's walk, and so forth. Naturally, there's still texturing to be done, but as far as modeling goes, the elements you see here are basically finished. Next I'll be working on the large, central dormer and the elements below it that connect the roof to the walls below. Wish me luck!

Indiana Jones queue progress

So, my inspiration seems to be back for the time being...we'll see how long it continues! =P In the mean time, here are two new renders. The first is the product of my curiosity - as I've been developing the various stairwells that connect the Indy queue/exit to Pirates and other areas, I've started wondering what those stairs would look like by themselves. Luckily, Blender makes it fairly easy to do this, so...well, here it is!



If you click the thumbnail for the larger version, you can then click Back to the Flickr photo page to see a version with "notes" that describe what's what, as usual.

The next render just showcases some of the work I've been doing on the Indy queue from kind of a fun perspective. If you climbed to the top of the queue entrance temple and magically cut down all the trees, what you'd see ought to look a lot like this.



New developments include holes in the roof and related theming, light fixtures on the catwalk in the background (hard to see), more camo netting on the side of Pirates, and modifications to the NOS-themed structure on the right that contains Indy's obelisk chamber. I've also worked a bit on the interior of the exit path, but you can't really see that in this render.